

Free Appropriate Sustainability Technology
FAST is Professor Joshua M. Pearce’s research group at Western University in London, Ontario. We design low-cost, open-source hardware and release it under free and open-source licences, so that others can build it, repair it and adapt it. Each project below is a working repository on GitHub, and its page here is rendered from that repository’s own documentation.
Scientific Equipment and Instrumentation
Open-source lab equipment that a lab can build, repair and modify for a fraction of the commercial cost.
A parametric OpenSCAD bioreactor built on glass jars from 1.5 L to 6.5 gal.
Supervise bench-scale reactors from a Raspberry Pi: sensor logging, heater and motor setpoints, and recorded runs, in a web interface.

A printed crank that strokes a 1 to 30 mL luer syringe's plunger back and forth from a gearmotor that never reverses.

A 3D-printed digital scale with a load cell, an HX711 and an Arduino Nano, read over serial for data logging, with its 2019 and 2020 predecessors.

A 3D-printed, solderless adapter that plugs an 8-SOIC chip into a breadboard like a DIP part.
A parametric OpenSCAD guide that steers a pipette tip into the centre of each well of a standard well plate.
Distributed Recycling and Additive Manufacturing
Turning waste plastic into feedstock, and printing useful parts locally.

Control electronics, firmware and enclosure for a heated scientific sheet press.
A parametric, printable hopper for plastic pellets and shredded regrind, with bayonet couplings and per-machine mounting plates.

A parametric OpenSCAD generator for threaded pipe couplings: a fitting, nuts and tapered gaskets, with threads from threadlib.
Frugal Biomedical
Low-cost medical devices that can be made where they are needed.
Resilient and Alternative Food
Tools for small farms and food production that keeps working when supply chains do not.




