Skip to content

Nasopharyngeal Swab

A parametric nasopharyngeal swab for sampling COVID-19 and other respiratory viruses, designed to be made locally on a resin (SLA) printer. The swab head is printed in resin and cured under UV, then pressed into a handle printed on an ordinary filament (FFF) printer.

It was developed in 2020, when swabs were short, and published in Gallup et al. (2020), below. The paper reports mechanical and synthetic-mucus tests, and states that the swabs need clinical verification before widespread use. This repository does not change that: the design has not been clinically validated.

A plate of swabs standing upright on the Original Prusa SL1’s build plate, in PrusaSlicer

Path What it is
cad/nasal_swab.scad The OpenSCAD model: the swab (tip, breakable body and lock base) and the lock handle it fits into.
cad/nasal_swab.json Customizer presets: nasal_swab_bullet_tip, nasal_swab_cone_tip and lock_handle.
cad/nasal_swab_sl1.ini The PrusaSlicer settings the swab heads were sliced with.
cad/tong_handle.stl The tong-style handle, an alternative to the lock handle. No source here.
cad/durability_test_tube.stl A 10 x 10 x 42 mm test part. No source here.

The UV curing box the paper describes is in its own repository, uwo-fast/uv-curing-box.

Open cad/nasal_swab.scad in OpenSCAD and pick a preset in the Customizer, or export from the command line:

Terminal window
openscad -p cad/nasal_swab.json -P nasal_swab_bullet_tip -o nasal_swab_bullet_tip.stl cad/nasal_swab.scad
openscad -p cad/nasal_swab.json -P lock_handle -o lock_handle.stl cad/nasal_swab.scad

The render parameter picks the part (nasal_swab, lock_handle or both) and tip_type the tip (bullet or cone). The tip, body, base and handle sections of the file set every dimension, each commented with its recommended value.

just check renders every preset, and a slice of the swab around its breakpoint hole, with warnings as errors, and compares their sizes and volumes with the designed values (tests/check_presets.py). CI runs it on every pull request. It checks the geometry only, not how a print performs.

  • Swab heads: resin. cad/nasal_swab_sl1.ini is for an Original Prusa SL1 with Prusa Orange Tough: 0.05 mm layers, 7.5 s exposure (35 s for the first layers), supports and pad on. Load it in PrusaSlicer with File > Import > Import Config.
  • Handles: a filament printer.
  • Curing: under UV, for example in the UV curing box. The paper tested tensile strength at four curing times.

From the paper: $0.0603 a swab with the press-fit handle, $0.1138 with the tong handle, and $45.42 for the UV curing system.

The swab model is by Adam Pringle of the Michigan Tech Open Sustainability Technology (MOST) group, dated 2020-04-21 in the source; Cameron K. Brooks of the FAST Research Group at Western reformatted it and replaced the deprecated assign(). The design files were first published on the Open Science Framework, https://osf.io/z5jgu/, and in ngallup4/Nasal-Swab-Files.

The paper releases the design under the GNU General Public License v3.0 and the CERN Open Hardware Licence v1.2. LICENSING.md says which files each covers, and both texts are in LICENSES/.

If you use this design, please cite the paper (also in CITATION.cff):

Gallup, N., Pringle, A. M., Oberloier, S., Tanikella, N. G., & Pearce, J. M. (2020). Parametric nasopharyngeal swab for sampling COVID-19 and other respiratory viruses: Open source design, SLA 3-D printing and UV curing system. HardwareX, 8, e00135. https://doi.org/10.1016/j.ohx.2020.e00135

Issues and pull requests are welcome. See the organization contribution guide.