Skip to content

Farm Tools: Plant Pot

  • Author: Cameron K. Brooks, FAST Research Group
  • Licence: MIT (see LICENSING.md)
  • Source: this repository, cad/plant-pot/

A tapered flowerpot, made by the plant_pot() module in cad/plant-pot/plant-pot.scad. It is a library: it renders nothing on its own.

  • Body: body_height, body_thickness, upper_outer_diameter, lower_outer_diameter, and sides, the number of faces around the body.
  • Lip (optional, drawn only when all four are set): lip_height, lip_thickness, and the lip’s top and bottom corner radii. lip_fn sets its smoothness.
  • Collar (optional): collar_height and collar_diameter.
  • Snap ring (optional), a ring around the body: snap_position, snap_radius and snap_gaps.
  • Internal vertical walls (optional): ivw_thickness, ivw_width, ivw_height and ivw_offset_angle. pos_ivw adds four walls inside the pot. neg_ivw cuts four matching slots through the base.
  • cad/plant-pot/examples/ has three pots sized in different ways: from two diameters, or from a wall angle and the upper or lower diameter.

  • cad/plant-pot/test-prints/pot_wall_snap.scad is the snap-in pot. Its Customizer presets in pot_wall_snap.json cover each combination of collar and internal walls. From cad/plant-pot/:

    Terminal window
    openscad -p test-prints/pot_wall_snap.json -P pot_wall_snap_ivw -o pot_wall_snap_ivw.stl test-prints/pot_wall_snap.scad

pot_comparison.md gives the mass and print time of each preset against the two fixed-size cleat pots.

The optional walls follow Container Design Affects Shoot and Root Growth of Vegetable Plant (HortScience 55(6), 787-794, 2020). In cucumber, pepper and tomato seedlings, containers with internal vertical walls gave more root surface and biomass. The type of container (round or square) had no effect, and the substrate (coir fibre or perlite) no significant one. The authors suggest the walls may also help plants through water deficit and transplanting.