Mass Scale: Sources
Where everything in this repository came from, and what else exists about the
scale that is not copied here. Collected in September 2026. The README’s
History says which folders and tags hold each
generation;
CHANGELOG.md
says what changed on import, and
dev/sources-inventory.md
lists the files left out, with checksums where they had them.
Primary
Section titled “Primary”| What | Where |
|---|---|
| Paper, 2020 | doi:10.3390/instruments4030018, open access, CC-BY-4.0; in paper/; a preprint and an author copy also exist |
| Firmware library, with history | gitlab.com/mtu-most/most_massbalance, included here (tags mtu-instruments-2020, mtu-final-2021, and upstream’s own v3.0.0 to v3.4.0) |
| CAD, the paper’s sketch, circuit, datasheets and test data | OSF me9a8, “Open source laboratory logging digital scale” (DOI 10.17605/OSF.IO/ME9A8), imported unchanged in the commit tagged mtu-osf-2020 |
| Project page, with the breadboard assembly guide | Appropedia: Open Source Digitally Replicable Lab-Grade Scales, adapted in electronics-assembly.md |
| STLs, mirrored | MyMiniFactory 126135, linked from Appropedia as the “quick download” (not fetched: the site sits behind a browser check) |
| Use video | “MOST OS Balance.mpeg” on OSF, the paper’s Video S1; attached to the mtu-osf-2020 release |
| The 2019 project’s page | Appropedia: 3D printed digital balance (its older title, “3-D Printable Digital Balance”, redirects there) |
Libraries the firmware uses, with their upstreams: the
HX711 library by Bogdan Necula (MIT),
bundled with the 2020 firmware at 0.7.4 and fetched at 0.7.5 for the current
firmware by just firmware-libs; Arduino’s
LiquidCrystal
(LGPL-2.1-or-later), bundled with the 2020 sketch at 1.0.7 and fetched at
the same version for the current firmware. The 2020 library’s OLED support
uses Adafruit’s SSD1306,
GFX and
BusIO libraries, installed by
just firmware-deps rather than bundled.
The v3 design’s load-cell and amplifier models come from
CameronBrooks11/load-cell-scad
(GPL-3.0), copied at commit c8f224a (2026-07-01) into
cad/openscad-v3/lib/load-cell-scad/.
The 2020 firmware’s serial interface implements the Scale Manufacturers
Association’s SCP-0499 protocol; the standard and the association’s load-cell
test guideline are linked from datasheets/.
Related
Section titled “Related”- The 2020 sketch’s README is the 2019 project’s README with a few items
struck through, and the revival’s README was the same document updated for the
serial-driven firmware; the 2019 original is kept at
firmware/os-nano-balance-2019/README.md. - The upstream repository’s earlier home. The library’s history starts on GitHub in January 2020 (its merge commits name pull requests there) and moved to the MOST group’s GitLab in 2020; the GitHub copy no longer exists.
