Skip to content

Pipe Fitting Generator: Legal Disclaimer

By using this script and the associated files in this repository, you agree to the following terms and conditions. If you do not agree with these terms, you must immediately discontinue use of the repository and its contents.

This repository, including the script and all associated files, is provided “as is,” without any warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose, and non-infringement. The authors make no representations or warranties that the script will meet your requirements, be error-free, or function without interruption.

The authors of this repository are not responsible for any damages, including but not limited to, direct, indirect, incidental, special, or consequential damages, or any loss of profits, data, or goodwill, arising from the use of this repository, even if the authors have been advised of the possibility of such damages. By using this repository, you agree to indemnify, defend, and hold harmless the authors from any claims or legal actions arising out of your use of the script or its results.

The pipe fitting script, when used for 3D printing or other manufacturing methods, may result in a physical product that could fail under certain conditions, including but not limited to mechanical stress, pressure, temperature variations, or manufacturing defects. The use of this repository for creating pipe fittings or similar components is entirely at your own risk. You are responsible for ensuring the safety and integrity of any 3D printed models and components, especially in applications involving high pressures or other hazardous conditions.

The results and tests presented in this repository are provided for informational purposes only. The authors do not guarantee the safety, performance, or reliability of any 3D printed pipe fitting created using this script. It is your responsibility to perform proper testing and validation of any components you produce with this script, including pressure testing and other safety assessments. Always take appropriate safety precautions when working with high-pressure systems.

You are permitted to modify and adapt the script to suit your needs, provided that all modifications remain subject to the terms of the GPL 3.0 license. However, any modifications or use of the repository do not absolve you of responsibility for any potential consequences arising from your use or the use of modified versions of this repository.

6. Compliance with Local Laws and Regulations

Section titled “6. Compliance with Local Laws and Regulations”

You are responsible for ensuring that your use of this repository and any resulting products comply with applicable laws, regulations, and safety standards in your jurisdiction. This includes, but is not limited to, compliance with engineering standards, manufacturing practices, and safety regulations for pressure vessels, piping systems, and materials.

This script is intended for use by individuals with appropriate knowledge of 3D printing, parametric design, and relevant safety protocols. It is not intended for use in mission-critical, life-threatening, or safety-critical applications. The authors disclaim any responsibility for any such usage.

By using this repository, you acknowledge that you have read and understood this legal disclaimer and agree to be bound by its terms. If you do not agree to these terms, you must refrain from using the repository or its contents.