Desktop Sheet Press
The controller for a heated sheet press that turns plastic into flat sheets and test specimens, from the paper Open-source cold and hot scientific sheet press for investigating polymer-based material properties. The paper covers the press itself. This repository holds its control electronics, firmware and enclosure.
Contents
Section titled “Contents”src/main/: the firmware, a two-channel PID temperature controller. It reads two thermocouples through MAX31855 amplifiers, switches two solid-state relays, shows a 16x2 LCD menu driven by a rotary encoder, and logs to an SD card.electrical/press_electrical_v1/: the KiCad schematic, with PDF and SVG exports.docs/Press_Elec_BOM.ods: the electrical bill of materials.- Enclosure: renders of the electrical enclosure, and a link to its Onshape CAD.
Build the firmware
Section titled “Build the firmware”The firmware targets the Arduino Nano Every (ATmega4809), using the Arduino megaAVR
boards package. Open src/main/main.ino in the Arduino IDE. It needs these
libraries:
- From the Library Manager: Adafruit MAX31855, PID (
PID_v1), SdFat (version 2), LiquidMenu, and LiquidCrystal_I2C. For the last, use the one LiquidMenu’s config points to, johnrickman/LiquidCrystal_I2C. - ClickEncoder, from 0xPIT/encoder. It is not in the Library Manager.
LiquidMenu drives a parallel LCD by default. In its LiquidMenu_config.h, switch
it to the I2C display. Comment out both defines in the parallel LiquidCrystal
block (LIQUIDMENU_LIBRARY and DisplayClass), and uncomment both in the I2C
block. Pins are set in src/main/config/hardware_def.h.
The firmware is no longer developed.
Use it
Section titled “Use it”- GUI: the LCD menu and encoder.
- Serial commands: setpoint, duration, PID gains and state, over USB serial.
Licence
Section titled “Licence”Hardware is under CERN-OHL-S-2.0. Firmware and documentation are under
GPL-3.0-only. These are the licences declared for the project’s
OSHWA certification CA000055.
Some vendored files keep their own terms. LICENSING.md says which
licence covers which file.
Citation
Section titled “Citation”Woods, M. C., Brooks, C. K., & Pearce, J. M. (2024). Open-source cold and hot scientific sheet press for investigating polymer-based material properties. HardwareX, 19, e00566. https://doi.org/10.1016/j.ohx.2024.e00566
The press was developed by the FAST Research Group at Western University.
