Skip to content

Batteries and E-Waste

These are the FAST group's own lab signs. They are written for one lab, its equipment, its layout and its local procedures, and are published so others can see and adapt them. They are not general safety guidance and they are not a substitute for training.

If you work somewhere else, follow your own workplace procedures and the requirements of your institution and jurisdiction.

reviewawaiting PI, post-doc, equipment owner or subject-matter reviewv0.1 · review owner: PI / post-doc · updated 2026-11-14
Item Local action
Used batteries of any common type: alkaline, lithium, lead-acid, NiMH Use the battery bin on the south wall counter of TEB7.
Electronics, circuit boards, wires, cables, and e-waste Use the e-waste bin on the south wall counter of TEB7.
Damaged, swollen, leaking, hot, or unknown batteries Do not place in the regular battery bin. Stop and ask the PI or a post-doc.
  • Do not put batteries or e-waste in regular garbage or recycling.
  • Do not tape over a damaged battery and leave it unattended without telling anyone.
  • Do not disassemble battery packs unless you are trained and authorized.
  • Do not mix chemical-contaminated electronics with normal e-waste.
  • Keep batteries and e-waste separated, and segregate batteries by type.
  • Tape over battery terminals before they go in the bin. A shorted 9 V battery can start a fire.
  • Batteries transfer to a labelled campus battery pail; the nearest listed location is the Spencer Engineering Building loading dock.
  • E-waste is collected through Western’s recycling program. Facilities Management Client Services, extension 83304, arranges collection.
  • Tell the PI or a post-doc when a bin is full. They arrange the transfer; do not move bins yourself.
  • Ask the PI or a post-doc if you are unsure where a battery or electronic item belongs.

Source: lab-signs/batteries-and-ewaste.md · all signs and records