Skip to content

Broken Glass and Sharps

These are the FAST group's own lab signs. They are written for one lab, its equipment, its layout and its local procedures, and are published so others can see and adapt them. They are not general safety guidance and they are not a substitute for training.

If you work somewhere else, follow your own workplace procedures and the requirements of your institution and jurisdiction.

reviewawaiting PI, post-doc, equipment owner or subject-matter reviewv0.1 · review owner: PI / post-doc · updated 2026-11-14
  • Do not pick up broken glass or sharp objects with bare hands.
  • Use a dustpan, broom, tweezers, tongs, or cut-resistant gloves if needed.
  • Sweep a larger area than the visible break so small fragments are not left behind.
  • Keep others away until the area is clean.
Item Action
Clean broken glass The glass container under the sink. NEVER the regular garbage, and never the sharps container beside it.
Razor blades, needles, scalpel blades, or similar sharps The sharps container under the sink, beside the glass container. NEVER the glass container: Western requires the two to be kept separate.
Chemical-contaminated glass or sharps Western-approved sharps container with a completed Hazardous Material for Disposal label. Ask first.
Unknown contamination Stop and ask the PI or a post-doc.
  • Do not overfill the container.
  • Close or secure the container before moving it.
  • Keep each waste stream in its own container. Chemical, biohazardous and radioactive sharps are handled separately and must not be combined.
  • Tell the PI or a post-doc when a container is full. They arrange the move; do not take it out of the lab yourself.

Source: lab-signs/broken-glass-and-sharps.md · all signs and records