Chemical and Materials Storage
These are the FAST group's own lab signs. They are written for one lab, its equipment, its layout and its local procedures, and are published so others can see and adapt them. They are not general safety guidance and they are not a substitute for training.
If you work somewhere else, follow your own workplace procedures and the requirements of your institution and jurisdiction.
reviewawaiting PI, post-doc, equipment owner or subject-matter review
Do Not Guess
Section titled “Do Not Guess”- Store chemicals only if you are trained and authorized to handle them, and read the label and SDS first. This sign is not a compatibility chart.
- Keep chemicals in compatible, labeled, closed containers.
- NEVER store bases in the acid cabinet.
- Do not store oxidizers, toxics, compressed gases, or anything this table does not list by guessing.
- If you are unsure where something belongs, do not put it away: ask the PI or a post-doc.
- Inorganic salts and ordinary organic liquids and solids may be stored together. The groups below are the exceptions.
Common Local Storage Locations After Compatibility Check
Section titled “Common Local Storage Locations After Compatibility Check”| Item / category | Location | Notes |
|---|---|---|
| Acids | Right lower cabinet of the fume hood | Never store bases here. Confirm compatibility before storage. |
| Bases | Left lower fume hood cabinet | Also labeled flammable. Keep bases away from acids; use secondary containment as required. |
| Lab-grade flammable solvents | Left lower fume hood cabinet / main flammable cabinet below hood | Keep closed, labeled, and in approved containers. |
| Spray paints, lubricants, hardware-store flammables | Yellow floor cabinet, left when facing the hood | Keep separate from lab-grade solvents. |
| Peroxide former | Flammable cabinet | Date when opened. Dispose at the SDS limit: 3 months for some ethers, 12 for most others. |
| Water-reactive | Per SDS, away from water and steam | Examples: sodium and potassium metal, phosphorus pentoxide, aluminum chloride. |
| Air-reactive (pyrophoric) | Under an appropriate gas, per SDS | Examples: alkyl lithiums, Grignard reagents, white phosphorus. |
| Oxidizer, toxic, compressed gas, or other special-hazard material | Do not guess from this sign | Check SDS and ask. |
| Possibly shock sensitive or explosive | Do not move it | Contact Occupational Health and Safety, extension 84847. |
| Unknown, unlabeled, leaking, damaged, or expired | Do not store | Stop and ask. |
Chemical Inventory
Section titled “Chemical Inventory”- Anyone trained and approved by the PI or a post-doc may add a chemical to storage; it must be labeled, compatible with its location, and recorded with its storage location in the chemical inventory spreadsheet.
Related
Section titled “Related”- See Fume Hood before working with volatile chemicals.
- See Waste Disposal before discarding chemicals or contaminated materials.
Sources / Procedure Links
Section titled “Sources / Procedure Links”- Lab Safety Manual: https://www.uwo.ca/hr/form_doc/health_safety/doc/manuals/lab_safety_manual.pdf
- Hazardous waste: https://www.uwo.ca/hr/safety/topics/hazardous_waste.html
Source: lab-signs/chemical-and-materials-storage.md · all signs and records
