Skip to content

Sink

These are the FAST group's own lab signs. They are written for one lab, its equipment, its layout and its local procedures, and are published so others can see and adapt them. They are not general safety guidance and they are not a substitute for training.

If you work somewhere else, follow your own workplace procedures and the requirements of your institution and jurisdiction.

reviewawaiting PI, post-doc, equipment owner or subject-matter reviewv0.1 · review owner: PI / post-doc · updated 2026-11-14
  • Keep the sink and surrounding counter clear for shared use.
  • Do not store parts, containers, tools, dishes, or projects in or around the sink.
  • If the sink is dirty, clean it before you leave and sign the cleaning log.
  • If you are repeatedly cleaning up after other people, raise it with the PI or a post-doc.
  • Do not pour chemicals, solvents, oils, greases, resins, acids, bases, or contaminated rinses down the drain.
  • Sewer discharge of hazardous waste is prohibited by law: the Canadian Environmental Protection Act and the City of London Waste Discharge Bylaw.
  • Do not rinse chemical containers, contaminated tools, gloves, or parts in the sink unless an approved procedure allows it. For empty containers, see Handbook section 2.5 below.
  • Do not pour very hot liquids down the sink. Allow them to cool first.
  • Do not guess. If you are unsure, stop and ask before anything goes down the drain.
Item Sink? Action
Clean water and handwashing after non-chemical work Yes Keep the area clean.
Chemical container or contaminated tool No Follow the waste-disposal procedure or ask.
Oil, grease, lubricant, resin, or solvent No Collect as directed by the waste-disposal procedure.
Acid, base, or unknown liquid No Do not neutralize, dilute, or pour it out unless an approved procedure explicitly says so.
  • For chemical exposure to skin or eyes, follow emergency procedures immediately and report the incident.

Source: lab-signs/sink.md · all signs and records