Stationary Tools
These are the FAST group's own lab signs. They are written for one lab, its equipment, its layout and its local procedures, and are published so others can see and adapt them. They are not general safety guidance and they are not a substitute for training.
If you work somewhere else, follow your own workplace procedures and the requirements of your institution and jurisdiction.
reviewawaiting PI, post-doc, equipment owner or subject-matter review
Training Required
Section titled “Training Required”- Stationary tools in TEB6 require training and sign-off by the PI or a post-doc before use.
- This includes the drill press, miter saw, scroll saw, and any other fixed or bench-mounted powered tool.
- If you have not been signed off, do not use the tool. Ask the PI or a post-doc who can train you.
- Sign-off is by the PI or a post-doc directly. There is no form to look up.
Before Use
Section titled “Before Use”- Wear required PPE.
- Wear long pants and closed-toe shoes.
- NEVER wear gloves, rings, watches, or bracelets on drill presses, miter/scroll/table saws, or any machine where they could be caught in a rotating or reciprocating tool.
- Tie back long hair, roll sleeves above the elbow, and keep loose clothing and lanyards clear of moving parts.
- Gloves may be used to handle blades, burrs, splintery stock, or sharp material after the machine is stopped, isolated, and unable to restart.
- Inspect the tool, guard, blade/bit, workholding, power cord, and work area.
- Use the correct blade, bit, speed, and setup for the material.
- Clamp, support, or fixture the work as required.
- Keep dust, chips, noise, and offcuts contained.
During Use
Section titled “During Use”- Keep hands clear of the cutting path and pinch zones.
- Do not force the tool.
- Stop if the tool binds, vibrates, overheats, sparks, smells wrong, or sounds wrong.
- Do not leave a running tool unattended.
When Done
Section titled “When Done”- Turn the tool off and wait for motion to stop.
- Clean chips, dust, scraps, and offcuts.
- Return shared accessories and PPE.
- Report damage, dull blades/bits, missing guards, or unsafe behavior.
Materials
Section titled “Materials”- Do not cut, drill, sand, or grind materials that may produce hazardous dust or fumes (lead, asbestos, composites, PVC) without a formal containment, ventilation, and PPE plan.
- Ask before working with unknown materials.
Related
Section titled “Related”- See Power Tools for hand-held power tools.
- See Manual Tools for hand tools.
Sources / Procedure Links
Section titled “Sources / Procedure Links”- CCOHS drill presses: https://www.ccohs.ca/oshanswers/safety_haz/metalworking/drillpresses.html
- CCOHS woodworking machines: https://www.ccohs.ca/oshanswers/safety_haz/woodwork/gen_safe.html
- Western Engineering shop procedures: https://www.eng.uwo.ca/departments-units/student-shop/health-safety.html
Source: lab-signs/stationary-tools.md · all signs and records
